YongLi has developed a range of belts coated with PVC, PU, PE, Hytrel and silicon that meet the most stringent industry standards, both for direct food contact as well for packed product conveying.
All are manufactured according the FDA, USDA and new EU regulation standards. Test reports of independent research institutes (such as Intertek) are available at request.
YongLi food conveyor belts are excellent resistant to oils and fat, high tensile strength, impregnated bottom side, easy to clean, high and low temperatures and good release characteristics. Belts are used in following markets: Bakery, confectionary, Meat and Poultry, Fish, Fruit and Vegetables, Dairy, Agricultural etc.
YongLi’s FDA -series meet the FDA, USDA and REACH-regulations.
Download here our brochure for this industry.
You can find our products for this industry below.
| Photo | Belt Code | Plies | Color | Pattern | Thickness | Cover thickness |
Effective pull at 1% elongation |
C | Width |
|---|---|---|---|---|---|---|---|---|---|
 |
P11-21N FDA | 1 | Smooth/Diamond | 2.0 | 0.6/0.9 | 6 | -10 +90 | 3000 | |
 |
P11-81N FDA | 1 | Smooth/Diamond | 2.0 | 0.6/0.9 | 6 | -10 +90 | 3000 | |
|
P12-21N FDA | 1 | Smooth/Diamond | 2.0 | 0.6/0.9 | 5 | -15 +80 | 3000 | |
 |
P12-24N + Felt | 1 | 2.0mm Felt | 2.6 | 0.3 | 8 | -10 +100 | 2000 | |
| P12-24N FDA | 1 | Smooth | 1.0 | 0.5 | 5 | -10 +90 | 3000 | ||
 |
P12-81N FDA | 1 | Smooth/Diamond | 2.0 | 0.6/0.9 | 5 | -15 +80 | 3000 | |
| P17-26/4N FDA | 1 | Round nipple | 1.7 | 1.2 | - | -10 +80 | 2000 | ||
| P21-26/11N FDA | 2 | Crescent | 5.0 | 3.2 | 10 | -10 +80 | 2000 | ||
 |
P21(3)-07N FDA | 2 | Smooth | 1.8 | - | 8 | -10 +80 | 3000 | |
 |
P22-07N | 2 | Fabric | 1.8 | - | 10 | -10 +80 | 3000 | |
 |
P22-21N FDA | 2 | Smooth/Diamond | 3.1 | 0.7/0.8 | 10 | -10 +90 | 3000 | |
| P22-23/23 FDA | 2 | Tooth (one-direction) / Diamond | 8.5 | 4.9/0.8 | 8 | -10 +80 | 3000 | ||
| P22-24/35N FDA | 2 | Small nipple | 2.9 | 2.0 | 10 | -10 +90 | 1200 | ||
 |
P22-24N FDA | 2 | Smooth | 2.4 | 0.7 | 10 | -10 +90 | 3000 | |
| P22-26/14RN FDA | 2 | Fishbone | 4.8 | 2.8 | 10 | -10 +90 | 1500 | ||
| P22-26/32H FDA | 2 | Cross rib | 6.0 | 4.2 | 10 | -10 +80 | 1200 | ||
| P22-26/37N FDA | 2 | Big nipple | 7.3 | 5.5 | 10 | -10 +90 | 1200 | ||
 |
P22-26/6NI FDA | 2 | Saw tooth | 4.8 | 3.0 | 10 | -20 +60 | 1450 | |
|
P22-26/6RN FDA | 2 | Saw tooth | 4.8 | 3.0 | 10 | -20 +60 | 1200 | |
 |
P22-28/0-0 N FDA | 2 | Matt/Matt | 3.0 | 0.7/0.7 | 10 | -10 +90 | 3000 | |
| P22-74/19NHRDI | 2 | Longitudinal rib | 2.6 | 1.2 | 10 | -15 +80 | 2000 | ||
 |
P22-81N FDA | 2 | Smooth/Diamond | 3.1 | 0.7/0.8 | 10 | -10 +90 | 3000 | |
| P22-84/35N FDA | 2 | Small nipple / 0.1mm impregnated | 2.6 | 0.9 | 10 | -10 +90 | 1200 | ||
 |
P22-84N FDA | 2 | Smooth | 2.4 | 0.7 | 10 | -10 +90 | 3000 | |
 |
P22-86/3N FDA | 2 | Super grip | 5.3 | 3.5 | 10 | -20 +70 | 2000 | |
| P22-86/6N FDA | 2 | Saw tooth | 4.8 | 3.0 | 10 | -20 +70 | 1200 | ||
 |
P22-86/81NI FDA | 2 | Pyramid | 5.0 | 3.2 | 10 | -10 +80 | 1200 | |
 |
P23-07N | 2 | Fabric | 1.8 | - | 5 | -10 +80 | 3000 | |
 |
P25-24 FDA | 2 | Smooth | 2.0 | 0.5 | 8 | -10 +90 | 3000 | |
 |
P25-24/1N FDA | 2 | Diamond | 2.1 | 0.7 | 8 | -10 +80 | 3000 | |
 |
P25-25N FDA | 2 | Smooth | 3.0 | 1.2 | 8 | -10 +90 | 3000 | |
 |
P25-84N FDA | 2 | Smooth | 2.0 | 0.5 | 8 | -10 +90 | 3000 | |
 |
P25-85N FDA | 2 | Smooth | 3.0 | 1.2 | 8 | -10 +90 | 3000 | |
 |
P27-07N | 2 | Fabric | 2.8 | - | 5 | -10 +90 | 3000 | |
 |
P31-21N FDA | 3 | Smooth/Diamond | 4.6 | 0.7/0.8 | 18 | -10 +90 | 3000 | |
 |
P31-29/0H FDA | 3 | Smooth/Matt finish | 6.2 | 2.0/1.0 | 18 | -15 +80 | 3000 | |
 |
P31-81N FDA | 3 | Smooth/Diamond | 4.6 | 0.7/0.8 | 18 | -10 +80 | 3000 | |
 |
P31-84 FDA | 3 | Smooth | 3.8 | 0.9 | 15 | -10 +90 | 3000 | |
 |
P32-24N FDA | 3 | Smooth | 3.9 | 1.0 | 13 | -10 +80 | 3000 | |
| P32-28/0 FDA | 3 | Smooth | 4.0 | 0.5 | 15 | -15 +80 | 3000 | ||
 |
P32-81N FDA | 3 | Smooth/Diamond | 4.6 | 0.7/0.8 | 18 | -10 +90 | 3000 | |
|
P32-84N FDA | 3 | Smooth | 3.8 | 0.9 | 15 | -10 +90 | 3000 | |
| S12-24BA | 1 | Smooth | 0.7 | 0.2 | 4 | -40 +150 | 2000 | ||
| S12-84BA | 1 | Smooth | 0.7 | 0.2 | 4 | -40 +150 | 2000 | ||
 |
S25-24A | 2 | Smooth | 1.6 | 0.15 | 7 | -40 +150 | 1200 | |
 |
S25-24BU | 2 | Smooth | 1.2 | 0.15 | 6 | -30 +100 | 2500 | |
| S25-24U | 2 | Smooth | 1.7 | 0.2 | 8 | -30 +100 | 2000 | ||
| S25-27U | 2 | 1.3 | 0.05 | 6 | -30 +100 | 2000 | |||
 |
TPRO T2-0A | 1 | Smooth | 1.5 | 0.5 | 12 | -30 +110 | 2000 | |
| U12-24/39RA | 1 | Small diamond | 1.0 | 0.3 | 6 | -20 +80 | 1200 | ||
| U12-84/7A | 1 | Golf | 1.5 | 0.9 | 6 | -20 +80 | 2000 | ||
 |
U2-2A | 1 | Smooth | 1.4 | 0.4 | 12 | -20 +80 | 3200 | |
 |
U2-2RHAI | 2 | Smooth | 2.1 | 1.0 | 15 | -20 +80 | 2000 | |
| U2-8/38RHAI | 2 | Triangle | 2.4 | 1.4 | 12 | -20 +80 | 1200 | ||
 |
U20-07B | 2 | Smooth | 1.3 | - | 5 | -30 +60 | 3200 | |
 |
U22-06/NGA | 2 | Smooth | 3.5 | 1.5 | 10 | -20 +80 | 2000 | |
 |
U22-14/0A | 2 | Matt finish | 1.6 | 0.3 | 12 | -20 +80 | 2000 | |
|
U22-15/0 | 2 | Matt finish | 2.0 | 0.2 | 10 | -20 +80 | 2000 | |
 |
U22-24/0RA | 2 | Matt finish | 1.5 | 0.3 | 8 | -20 +80 | 2000 | |
 |
U22-24HA | 2 | Gloss | 2.4 | 1.0 | 12 | -20 +80 | 2000 | |
 |
U22-74/0GA | 2 | Matt finish | 2.0 | 0.25 | 10 | -20 +80 | 2000 | |
| U22-75/7GA | 2 | Golf | 2.9 | 0.7 | 8 | -20 +80 | 2000 | ||
 |
U22-84/0A | 2 | Matt finish | 1.5 | 0.3 | 12 | -20 +80 | 2000 | |
 |
U32-84/0A | 3 | Matt finish | 2.4 | 0.3 | 12 | -20 +80 | 2000 | |
 |
UPRO 1/10 C-CR | 1 | Convex rhombus | 1.0 | 0.5 | 3 | -20 +80 | 1500 | |
 |
UPRO 1/12 W-DM | 1 | Diamond 2.0mm | 1.2 | 0.7 | 3 | -20 +80 | 3000 | |
 |
UPRO 1/7 0-M NA #40 | 1 | Harlequin | 0.75 | 0.2 | 3 | -20 +80 | 1200/1500 | |
 |
UPRO 1/7 W-G | 1 | Gloss finish | 0.7 | 0.2 | 3 | -20 +80 | 3200 | |
|
UPRO 1/7 W-G NS | 1 | Glossy | 0.7 | 0.2 | 3 | -20 +80 | 3200 | |
 |
UPRO 1/7 W-M | 1 | Matt finish | 0.7 | 0.2 | 3 | -20 +80 | 3200 | |
|
UPRO 1G/12 W-M | 1 | Matt finish | 1.2 | 0.4 | 6 | -20 +80 | 3200 | |
 |
UPRO 2/13 B-M AM | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
|
UPRO 2/13 B-M FL | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
|
UPRO 2/13 B-M NA | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
 |
UPRO 2/13 G-FI NA | 2 | Fabric impregnated | 1.3 | 0.1 | 8 | -20 +80 | 3200 | |
 |
UPRO 2/13 W-G | 2 | Gloss finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
|
UPRO 2/13 W-G ET NS | 2 | Glossy | 1.3 | 0.2 | 6 | -40 +80 | 3200 | |
|
UPRO 2/13 W-G NS | 2 | Glossy | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
 |
UPRO 2/13 W-M | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
 |
UPRO 2/13 W-M AM | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
 |
UPRO 2/13 W-M FL | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
|
UPRO 2/13 W-M HM | 2 | High matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
 |
UPRO 2/14 G-M | 2 | Matt finish | 1.4 | 0.3 | 8 | -20 +80 | 3200 | |
|
UPRO 2/14 G-M HM | 2 | High matt finish | 1.4 | 0.3 | 8 | -20 +80 | 3200 | |
| UPRO 2/14 N-M | 2 | Matt finish | 1.4 | 0.3 | 8 | -20 +80 | 3200 | ||
 |
UPRO 2/15 W-M | 2 | Matt finish | 1.5 | 0.4 | 8 | -20 +80 | 3200 | |
 |
UPRO 2/17 B-DM | 2 | Diamond | 1.7 | 0.7 | 6 | -20 +80 | 3000 | |
 |
UPRO 2/17 W-DM | 2 | Diamond 2.0mm | 1.7 | 0.7 | 6 | -20 +80 | 3000 | |
 |
UPRO 2/17 W-M NA | 2 | Matt finish | 1.7 | 0.45 | 18 | -20 +80 | 3200 | |
 |
UPRO 2/20 T-M | 2 | Matt finish | 2.0 | 0.7 | 10 | -20 +80 | 3200 | |
|
UPRO 2/22 W-M | 2 | Matt finish | 2.2 | 0.9 | 10 | -20 +80 | 3200 | |
|
UPRO 2/24 W-M | 2 | Matt finish | 2.4 | 0.7 | 10 | -20 +80 | 3200 | |
 |
UPRO 2/38 T-M | 2 | Matt finish | 3.8 | 1.5 | 14 | -20 +80 | 3200 | |
 |
UPRO 2/9 B-Fi | 2 | Fabric impregnated | 1.05 | - | 5 | -20 +80 | 3200 | |
 |
UPRO 2/9 T-F | 2 | - | 1.0 | - | 5 | -20 +80 | 3200 | |
|
UPRO 2F/13 W-M NA | 2 | Matt finish | 1.3 | 0.2 | 6 | -20 +80 | 3200 | |
 |
UPRO U22R | 2 | Gloss finish/Rice | 2.2 | 0.45/0.6 | 10 | -20 +80 | 3000 |
